«
»

What can I put on my golf cart battery cables to prevent corrosion?

golf
Louis B asked:


The battery cables in my golf cart are becoming corroded and I’m not sure why (I’m not exactly the mechanical type). Anyway, what can I spray or put on these cables to prevent the corrosion? Also, the corrosion is occuring on the metal part of the cables where they connect to the batteries.
One of my friends suggested liquid electrical tape. Is that a good idea?

Tags: , , , , , ,

This entry was posted on Friday, August 29th, 2008 at 9:26 pm and is filed under Maintenance & Repairs. You can follow any responses to this entry through the RSS 2.0 feed. Responses are currently closed, but you can trackback from your own site.

6 Responses to “What can I put on my golf cart battery cables to prevent corrosion?”

  1. bill v Says:
    August 31st, 2008 at 8:07 am

    Axle grease or Vaseline should do it.

  2. Jeff B Says:
    September 1st, 2008 at 6:24 am

    No. that stuff will solidify. They sell stuff at the auto store that is both conductive and made to protect your cables and posts. Get the proper product for the application.

  3. Ben A Says:
    September 3rd, 2008 at 12:21 pm

    you should put vasoline on the battery heads.. that will stop corrosion there.. make sure to scrub off all the corrosive buildup first… but I think you just need to replace the cable. when buying a new cable- make sure it has a good plasic coating.

  4. oklatom Says:
    September 5th, 2008 at 4:32 pm

    Clean things well, reinstall tightly and put on a thin coat of Vaseline Petroleum Jelly over the terminals.

  5. David A Says:
    September 9th, 2008 at 1:28 am

    First you need to clean all and i mean all the corrosion off the cables and battery post use a wire brush, screwdriver, knife or whatever it takes to get it. Then clean it with baking soda and water can also be used . After the cables are clean and tight on the post cote them with dielectric grease or grease used for electric connections.

  6. Jerry G Says:
    September 11th, 2008 at 12:37 pm

    baking soda and water solution make a paste and put it on. old trick for battery on boat